does the CTS1300 support document camera's and how?

Unanswered Question
Aaron Harrison Tue, 06/15/2010 - 00:02
User Badges:
  • Super Bronze, 10000 points or more
  • Community Spotlight Award,

    Member's Choice, May 2015

Hi


Document camera support is the same accross the range - basically it supports Wolfvision cameras, and they connect in to the CTS unit via Ethernet and video cable.


The camera is installed into the ceiling above the desk in front of the CTS unit.


Regards


Aaron

Marwan ALshawi Tue, 06/15/2010 - 15:36
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

are you sure about this ?

as i know it dose not, because the in  CTS 1300 the document camera connection in the codec being used to extend to the ACU for the two other cameras to be connected indirectly to the codec !!!

dannymget Fri, 06/18/2010 - 06:04
User Badges:

Right, that's why on the CTS-1300, document cameras must be connected via the VGA input.
The codec ist not capable to handle it like on the other systems.
PC content is routed via the wolfvision vga input and switched through their remote control.

Not a very elegant solution.


Danny

dannymget Tue, 07/20/2010 - 07:03
User Badges:

And that's why Cisco has a presentation called "Cisco Telepresenc

e Peripheral Integration Guide" posted on the Cisco ET platform recently that exactly describes how it works. A document camera works as already mentionned.

MARTIN STREULE Tue, 07/20/2010 - 07:16
User Badges:
  • Silver, 250 points or more

Found the preso you mentioned.

There goes my trust :-)


Thanks for the input.

/Martin

Actions

This Discussion

Related Content