06-10-2010 01:08 AM
Hello!
First of all, I'd like to give a huge shout-out to all subscribers on this forum witch is great source of troubleshooting Information.
I've got problem which is i thik connected to DfmInv db connection.
A few days ago I've made bulk manage/unmanage db update. Since than after reboot DFM stopped sanding notifications and process network event/alerts. Other symptom is that it is impossible to accomplish backup due to dfmInv connection problem. All processes are up besides CWAPublisher, DataPurge, FHPurgeTask, DFMCTMStartup. The server is slave dedicated to DFM (no RME, CM or IPM)
I've attached dbbackup.log and cli logs confirming dfmInv, dfmEpm and dfmFh validation.
If anybody knows a solution to my problem please let me know.
Thx for the answers in advance.
Best Regards,
Przemek Przytula
Solved! Go to Solution.
06-14-2010 06:44 AM
See the section on recovering from a server crash in https://supportforums.cisco.com/docs/DOC-8796 . Try the steps for recovering the DB transaction logs for the dfmInv database, then reboot. Then see if you can perform a backup.
06-12-2010 04:05 PM
Post the output of the pdshow command as well as screenshots of the Services control panel showing all of the CiscoWorks services.
06-13-2010 03:15 AM
06-14-2010 06:44 AM
See the section on recovering from a server crash in https://supportforums.cisco.com/docs/DOC-8796 . Try the steps for recovering the DB transaction logs for the dfmInv database, then reboot. Then see if you can perform a backup.
06-25-2010 06:57 AM
Hello,
I've done steps described in the document you sent me, and after a few weeks DFM still works fine with no problems. Thank you for the solution.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide