Config 1242 ap

Unanswered Question
Jun 10th, 2010
User Badges:

I have a config file and need to copy it to a 1242ag IOS12.4, using CLI consoled into the AP it does not copy right for some reason. How do I copy the file over?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Thu, 06/10/2010 - 15:14
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

1.  Do you have a TFTP client?

2.  The command is "copy tftp:/// flash:"


Hope this is what you are looking for.


Please don't forget to rate useful posts.  Thanks.

Gregory55 Mon, 06/14/2010 - 07:34
User Badges:

Leolaohoo

I get the conection to the ap using tftp but it gives me an error at "flash" part of the command any thoughts?

Thanks

Leo Laohoo Mon, 06/14/2010 - 15:51
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

If your filename ends with a .BIN then use the command "copy tftp:/// flash:" (don't forget the ":" the word "flash").


If your filename ends with a .TAR then use the command "archive download-swtftp:///"


Hope this helps.

Actions

This Discussion

Related Content

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode