ASA Failover Quries....

Answered Question
Jun 11th, 2010

I have one query in Pix/ASA failover with Active/standby scenario..

If HA cable is break between both firewall, what will happen....is,

Active remain active or standby tries to become active? (Both become active)

And also pls let me know if there is any doc for active/standby and active/active scenario..

Thanx .......

Correct Answer by andrew.prince@m... about 6 years 8 months ago

See the below for config examples:-

http://www.cisco.com/en/US/products/ps6120/prod_configuration_examples_list.html

To answery our question - if the failover link fails while in operation, nothing will happen.  The Active will remain active, the secondary will be the secondary.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml

HTH>

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
andrew.prince@m... Fri, 06/11/2010 - 02:15

See the below for config examples:-

http://www.cisco.com/en/US/products/ps6120/prod_configuration_examples_list.html

To answery our question - if the failover link fails while in operation, nothing will happen.  The Active will remain active, the secondary will be the secondary.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml

HTH>

Actions

This Discussion