cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1502
Views
0
Helpful
9
Replies

Broadband RAS over PPPoe

vikas kumar
Level 1
Level 1

Dear AllI am configuring Broadband RAS over PPPoe on Cisco 7206 ( IOS  12.2(33) SRD).

some  commands i am not able to run like

aaa  authorization subscriber-service default group AAA-SERVERS

aaa server radius sesm

scenario is  like this

END  User-> Broadband RAS->(Management software with DHCP server)->  Bandwidth manager-> core Router -> Internet

Broadband  RAS will manage All internet user with the help of management software.

please help  me

vikas

9 Replies 9

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Vikas,

have you enabled aaa new-model with

conf t

aaa new-model

this is required in order to run other aaa commands

in you have already aaa new-model

post

sh ver | inc image

it may be a question of feature set

Hope to help

Giuseppe

Hi Giuslar

thanks so much for reply.

i have enable AAA new model.

i configured other aaa commands

BRAS#show version | inc image


System image file is "disk2:c7200p-ipbase-mz.124-15.T9.bin"

regards

vikas

Hello Vikas,

ipbase means basic features you likely need another feature set.

the feature navigator can help you to choice the right image once the name of the feature is known

http://www.cisco.com/go/fn

Edit:

I will come back when I will have an idea about the feature you need

Edit2:

I couldn't find any reference to the two commands you have mentioned in several command references of 12.4T IOS

aaa  authorization subscriber-service default group AAA-SERVERS

aaa server radius sesm

may you provide a link of where you have found these commands?

You may be attempting to use commands that were supported in an older IOS image and that have been replaced by other ones

As noted by Chetan you need a more powerful feature set for sure.

Hope to help

Giuseppe

HI GUISLAR

thanks for your support and suggestion ,

i have to configure Cisco 7206 As BRAS for an ISP, i got these Commons from

http://www.cisco.com/en/US/docs/ios/solutions_docs/edge_ios/dep_ge.pdf


can you please help me to do this.


if i will get concept that will be great to do this job, because few things are very confusing.

thanks with regards

vikas kumar

Hi

The Output that you post System image file is "disk2:c7200p-ipbase-mz.124-15.T9.bin" not support this feature.

The Below IOS Support the AAA Authorization and Authentication Cache , AAA server group  & These are IPBase W/O Crypto

15.0(1)M2c7200-ipbase-mz.150-1.M2.bin51264
15.0(1)M1c7200-ipbase-mz.150-1.M1.bin51264
15.0(1)Mc7200-ipbase-mz.150-1.M.bin51264
12.2(33)SRE1c7200-ipbase-mz.122-33.SRE1.bin51264
12.2(33)SREc7200-ipbase-mz.122-33.SRE.bin51264
12.2(33)SRD4c7200-ipbase-mz.122-33.SRD4.bin12864
12.2(33)SRD3c7200-ipbase-mz.122-33.SRD3.bin12864
12.2(33)SRD2ac7200-ipbase-mz.122-33.SRD2a.bin12864
12.2(33)SRD2c7200-ipbase-mz.122-33.SRD2.bin12864
12.2(33)SRD1c7200-ipbase-mz.122-33.SRD1.bin12864
12.2(33)SRDc7200-ipbase-mz.122-33.SRD.bin12864
12.2(33)SRC6c7200-ipbase-mz.122-33.SRC6.bin12864
12.2(33)SRC5c7200-ipbase-mz.122-33.SRC5.bin12864
12.2(33)SRC4c7200-ipbase-mz.122-33.SRC4.bin12864
12.2(33)SRC3c7200-ipbase-mz.122-33.SRC3.bin12864
12.2(33)SRC2c7200-ipbase-mz.122-33.SRC2.bin12864
12.2(33)SRC1c7200-ipbase-mz.122-33.SRC1.bin12864
12.2(33)SRCc7200-ipbase-mz.122-33.SRC.bin12864

Regards

Chetan Kumar

Dear Chetan

thanks for your support and suggestion

please tell me what should i do change the IOS or what else.

i have to configure Cisco 7206 as BRAS for an ISP.

i dont have any idea to do this..

please help me,

thanks with regards

vikas kumar

Hi  Vikas

Frist of all you need to download an IOS from Cisco . ( It Requried CCO Login )

Then Using TFTP you can change the IOS , But I Suggest you to go with any Advance Security Image not ip base image.

You can use the cisco navigator to find the best IOS & Respective feature  : http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

You can refer the below link for installing an IOS .

http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/prod_release_note09186a00800810f3.html#35260

Regards

Chetan Kumar

Hi chetan

thanks for your support and suggetions.

i got image in disk2:  c7200p-ipbase-mz.122-33.SRD.bin.

i ran BOOT SYSTEM to boot from this file

now i am able to run this AAA Commands. but few thing i want to configure

1. AAA Shared Secret Configured In NAS(Cisco BRAS)

2.Dynamic Port (For CoA and PoD)

3. Dynamic Secret (if it is different than main Shared Secret)

4.Pre-paid service(s) details (Configured in Cisco BRAS).

can you please explane this in details and how to do this.

thanks with regards

vikas kumar

Hi Vikas

I am not so used to with BRAS configuration , Please check the below link , May be that can help you.

http://www.cisco.com/en/US/docs/ios/solutions_docs/edge_ios/dep_ge.html

Regards

Chetan Kumar

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: