06-13-2010 04:48 PM - edited 03-04-2019 08:46 AM
Good evening every body;
I create a new vlan with my packet tracer 5.1; and then i put on it 2hosts
then i remove the hosts to vlan 1 so the new vlan 34 is empty==> i want to remove this vlan from my switch list
Please check the picture below
Solved! Go to Solution.
06-13-2010 05:24 PM
Hi Samy,
Not familiar with packet tracer but if you have access to the switch via cli, just login and issue these commands:
config t
no vlan 34
HTH
Reza
06-13-2010 05:24 PM
Hi Samy,
Not familiar with packet tracer but if you have access to the switch via cli, just login and issue these commands:
config t
no vlan 34
HTH
Reza
06-13-2010 06:35 PM
Thank youuuu very much Reza
you are very helpful.
it is working :-)
Thank you again :-)
06-13-2010 08:18 PM
Glad to help Samy
Thanks for the rating
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: