06-13-2010 04:48 PM - edited 03-04-2019 08:46 AM
Good evening every body;
I create a new vlan with my packet tracer 5.1; and then i put on it 2hosts
then i remove the hosts to vlan 1 so the new vlan 34 is empty==> i want to remove this vlan from my switch list
Please check the picture below
Solved! Go to Solution.
06-13-2010 05:24 PM
Hi Samy,
Not familiar with packet tracer but if you have access to the switch via cli, just login and issue these commands:
config t
no vlan 34
HTH
Reza
06-13-2010 05:24 PM
Hi Samy,
Not familiar with packet tracer but if you have access to the switch via cli, just login and issue these commands:
config t
no vlan 34
HTH
Reza
06-13-2010 06:35 PM
Thank youuuu very much Reza
you are very helpful.
it is working :-)
Thank you again :-)
06-13-2010 08:18 PM
Glad to help Samy
Thanks for the rating
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide