Cisco LMS3.2 Netconfig

Unanswered Question
Jun 14th, 2010
User Badges:

Hello,


I just started a new job and I am now in charge of the exploitation and surveillance of many different customer networks.

Most of these networks are managed with Cisco LMS (v3.2) which I'm not very familiar with.

I managed to create user-defined jobs so I could deploy different basic functionnalities over hundred of devices. Cool....

Nevertheless, I am now stuck with a job I can't figure out how to do...

I actually have to add ip sla command lines to around 150 devices (C1812) for a new customer.

The problem is that the 3rd and last octets of the ip adresses in there change: 3rd octet can be 2,3,12 and 13 and last octet would go from 10 to 254. accordind to the router (vlan id).

I found that Parameterized Templates might help me but I don't know how to proceed with that.

Any idea or tips from someone who have already used this?

Thanks in advance!

KatyD



ip sla  11
udp-jitter  172.27.3.43 16245 source-ip 172.27.13.43
frequency 300
tos 0 
exit
ip sla  schedule 11 start-time now life forever
!
ip sla  12
udp-jitter  172.27.2.43  16245 source-ip 172.27.12.43
frequency 300
tos 0 
exit
ip sla  schedule 12 start-time now life forever
!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Tue, 06/15/2010 - 21:10
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Yes you have to use parameterized templates.  Your templates will look like:



ip sla  11
udp-jitter  $dest1 16245 source-ip $source1
frequency 300
tos 0 
exit
ip sla  schedule 11 start-time now life forever
!
ip sla  12
udp-jitter  $dest2 16245 source-ip $source2
frequency 300
tos 0 
exit
ip sla  schedule 12 start-time now life forever
!


Then, you will need to create parameter XML files according to http://SERVER/help/rme/fundamentals/netcfg_ParametTemplates.html#wp1380442 .


For example:



   172.27.3.43

  172.27.13.43


k.desrosiers Wed, 06/16/2010 - 05:11
User Badges:

Hello,


Thanks a lot for your answer!

Your examples help me see how I can to use these parameterized templates.

Actions

This Discussion