cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
659
Views
5
Helpful
4
Replies

CME: Change Class of Service to INTERNATIONAL

rossporubski
Level 4
Level 4

Hello,

Currently one of our remote offices class of service restriction only allows long distance. International is blocked. It's been requested by the business to remove the restriction to allow all service...local, toll, LD and Intnl.

I do not know where on the router the code is set to add/remove restriction.

Any help is greatly appreciated.

Thank you.

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Ross,

These restrictions would be set via COR.

Have you looked at this good doc;

Configuring Class of Restrictions (COR)

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml

Hope this helps!

Rob

View solution in original post

4 Replies 4

Rob Huffman
Hall of Fame
Hall of Fame

Hi Ross,

These restrictions would be set via COR.

Have you looked at this good doc;

Configuring Class of Restrictions (COR)

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml

Hope this helps!

Rob

I will check this, thank you Rob for reply! Oh and btw....if you are an enforcer fan in hockey, Brian has informed the Flames have not asked him back for 2010-2011....BOOOOOOO!

Ok, I was looking in the right place then. We're set up properly. Turned out this was the LEC in this instance. They had all numbers in the block going out on the main number. Which was configured for local calling only.

Thanks again for your assistance

Rob Huffman
Hall of Fame
Hall of Fame

Hey Ross,

Thanks for posting back with your results my friend (+5)

The Flames......I don't know what to say about my beloved team

Brian McGrattan was one of the few players who seemed to really care and always gave

100% so it seems about right that he won't be back! I'm guessing we should be making

a Cup run in about 2017 hahahahaha........sigh! 

Cheers!

Huff

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: