Cisco ASA 5510 Multiple dynamic L2L VPN config needed

Answered Question
Jun 15th, 2010

Hello,

We are having Cisco asa 5510 with static IP. Also we have a remote office with a dynamic IP. Now we are having dynamic to static L2L VPN configured. And now we need to add new tunnel to another site with a dynamic IP. Is it possible? Does anybody have a woking example, or manual?

Oleg Kobelev

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3.7 (3 ratings)
Loading.
realnakrul Tue, 06/15/2010 - 22:24

Thank you for your example. But now i have such configu

ration. My problem is to add new dynamic tunnel to existing configuration.

There are in the example:

!--- The security appliance provides the default tunnel groups
!--- for Lan to Lan access (DefaultL2LGroup) and configure the preshared key
!--- (cisco123) to authenticate the remote router. 

Should i use the same preshared key on the new site? Or i had to create new tunnel group?

Oleg Kobelev

realnakrul Wed, 06/16/2010 - 04:35

So, i have to add only access

-list entery for new network? No new crypto map and isakmp policy?

Oleg Kobelev

Actions

This Discussion