06-15-2010 05:27 AM - edited 03-15-2019 11:15 PM
Hi guys,
I have a scenario with one CUCME ver. 7
The problem that i am facing is conference feature not working for ad-hoc or meetme number.
The debug hw-conference output is:
.Jun 15 12:25:11.723: SkinnyHideAdhocConfNumber for dn=44 chan=1 streamID=0
.Jun 15 12:25:11.727: SkinnyUpdateHWConfState: dn 117 chan 1 phone 43 pdn 44 pchan 1 state 7:
.Jun 15 12:25:11.727: skinny_hwcfbi_find_conferenceId_by_number: this is not an active conf number 7
.Jun 15 12:25:11.727: skinny_hwconf_admit_conf_call pdn 44 pchan 1 adhoc 0, confID 0x0, number 7
.Jun 15 12:25:11.727: skinny_hwcfbi_confId_to_confBlk: invalid conference id 0x0
.Jun 15 12:25:11.735: SkinnyUpdateHWConfState: dn 117 chan 1 phone 43 pdn 44 pchan 1 state 0:
.Jun 15 12:25:11.739: skinny_hwcfbi_find_conferenceId_by_number: this is not an active conf number 7
.Jun 15 12:25:11.927: SkinnyHideAdhocConfNumber for dn=44 chan=1 streamID=0
.Jun 15 12:25:13.223: SkinnyHideAdhocConfNumber for dn=44 chan=1 streamID=0
.Jun 15 12:25:13.243: SkinnyHwconfConfSKButtonSet:for dn 44 chan 1 set=0 conf_sk=0
The config DN's for ad-hoc and meetme is:
ephone-dn 115 octo-line
number 5
conference ad-hoc
preference 1
no huntstop
!
!
ephone-dn 116 octo-line
number 6
conference ad-hoc
preference 2
no huntstop
!
!
ephone-dn 117 octo-line
number 7
conference meetme
preference 1
no huntstop
The output for show dspfarm all is:
Dspfarm Profile Configuration
Profile ID = 2, Service = TRANSCODING, Resource ID = 1
Profile Description :
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : ACTIVE
Application : SCCP Status : ASSOCIATED
Resource Provider : FLEX_DSPRM Status : UP
Number of Resource Configured : 3
Number of Resource Available : 3
Codec Configuration
Codec : g711ulaw, Maximum Packetization Period : 30
Codec : g711alaw, Maximum Packetization Period : 30
Codec : g729ar8, Maximum Packetization Period : 60
Codec : g729abr8, Maximum Packetization Period : 60
Dspfarm Profile Configuration
Profile ID = 1, Service = CONFERENCING, Resource ID = 2
Profile Description :
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : ACTIVE
--More--
Jun 15 12:27:58.790: %ISDN-6-CONNECT: Interface Serial0/0/0:13 is now connected Application : SCCP Status : ASSOCIATED
Resource Provider : FLEX_DSPRM Status : UP
Number of Resource Configured : 1
Number of Resource Available : 1
Codec Configuration
Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729abr8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required
SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED
0 2 24.3.0 UP N/A FREE xcode 1 - - -
0 2 24.3.0 UP N/A FREE xcode 1 - - -
0 2 24.3.0 UP N/A FREE xcode 1 - - -
0 3 24.3.0 UP N/A FREE conf 2 - - -
Total number of DSPFARM DSP channel(s) 4
and the main configuration for DSPFARM and SCCP is:
sccp local GigabitEthernet0/0.112
sccp ccm 192.168.112.253 identifier 1 priority 1 version 7.0
sccp
!
sccp ccm group 1
bind interface GigabitEthernet0/0.112
associate ccm 1 priority 1
associate profile 1 register confdsp1
associate profile 2 register transcode
!
dspfarm profile 2 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 3
associate application SCCP
!
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum conference-participants 16
maximum sessions 1
conference-join custom-cptone jointone
conference-leave custom-cptone leavetone
associate application SCCP
telephony-service
sdspfarm conference mute-on 111 mute-off 222
sdspfarm units 2
sdspfarm transcode sessions 3
sdspfarm tag 1 confdsp1
sdspfarm tag 2 transcode
conference hardware
max-conferences 8 gain -6
.....
What could be the problem???
Thanks in advance.
best regards,
Nuno
Solved! Go to Solution.
06-15-2010 06:44 AM
Hi, you can have a try changing the following ephone-dn numbers like below:
!
ephone-dn 115 octo-line
number A100
conference ad-hoc
!
ephone-dn 117 octo-line
number A101
conference meetme
!
You have maximum session for conferencing is 1, so you will need only conferencing DN, create one for ad-hoc and another for meetme.
HTH
06-15-2010 06:44 AM
Hi, you can have a try changing the following ephone-dn numbers like below:
!
ephone-dn 115 octo-line
number A100
conference ad-hoc
!
ephone-dn 117 octo-line
number A101
conference meetme
!
You have maximum session for conferencing is 1, so you will need only conferencing DN, create one for ad-hoc and another for meetme.
HTH
06-15-2010 07:52 AM
Hi Mijanur,
Your answer is correct.
The Cisco procedure does not talk about non dial numbers :|
Thank you very much.
regards,
Nuno
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: