06-15-2010 10:42 AM - edited 03-06-2019 11:35 AM
Hi all,
i need to block communication between vlans in one 3750 switch, i tried using access-list but not working.
i have 2 vlans 23(172.16.23.0/24) and 24(172.16.24.0/24), and i want to block all communication between these vlans.
can any1 help to config vacl between these 2 vlans.
Regards
Amar
Solved! Go to Solution.
06-15-2010 12:32 PM
amardram123 wrote:
Hi all,
i need to block communication between vlans in one 3750 switch, i tried using access-list but not working.
i have 2 vlans 23(172.16.23.0/24) and 24(172.16.24.0/24), and i want to block all communication between these vlans.
can any1 help to config vacl between these 2 vlans.
Regards
Amar
You don't use vacl's for this.
access-list 101 deny ip 172.16.23.0 0.0.0.255 172.16.24.0 0.0.0.255
access-list 101 permit ip 172.16.23.0 0.0.0.255 any
access-list 102 deny ip 172.16.24.0 0.0.0.255 172.16.23.0 0.0.0.255
access-list 102 permit ip 172.16.24.0 0.0.0.255 any
int vlan 23
ip access-group 101 in
int vlan 24
ip access-group 102 in
Jon
06-15-2010 12:32 PM
amardram123 wrote:
Hi all,
i need to block communication between vlans in one 3750 switch, i tried using access-list but not working.
i have 2 vlans 23(172.16.23.0/24) and 24(172.16.24.0/24), and i want to block all communication between these vlans.
can any1 help to config vacl between these 2 vlans.
Regards
Amar
You don't use vacl's for this.
access-list 101 deny ip 172.16.23.0 0.0.0.255 172.16.24.0 0.0.0.255
access-list 101 permit ip 172.16.23.0 0.0.0.255 any
access-list 102 deny ip 172.16.24.0 0.0.0.255 172.16.23.0 0.0.0.255
access-list 102 permit ip 172.16.24.0 0.0.0.255 any
int vlan 23
ip access-group 101 in
int vlan 24
ip access-group 102 in
Jon
06-16-2010 07:36 AM
Hi all,
i need to block communication between vlans in one 3750 switch, i tried using access-list but not working.
i have 2 vlans 23(172.16.23.0/24) and 24(172.16.24.0/24), and i want to block all communication between these vlans.
can any1 help to config vacl between these 2 vlans.
Regards
Amar
Hi Amar,
A Jon has provided the solution just check out the below link for basic understanding of acl implementation on routers
http://www.sans.org/reading_room/whitepapers/networkdevs/easy-steps-cisco-extended-access-list_231
Hope to Help !!
Ganesh.H
Remember to rate the helpful post
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: