Assistance on the instllation of an AIP-SSM20

Unanswered Question
Scott Fringer Wed, 06/16/2010 - 06:25
User Badges:
  • Cisco Employee,

Carlos;


  You will want to review this link for initial configuration of the AIP-SSM:


http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/cli/cli_ssm.html


  The module itself will need an IP address for remote access/management, the host ASA will need a service policy to divert traffic of interest to the AIP-SSM for inspection, and you will want a valid license on the AIP-SSM so you can update the detection signatures.


Scott

Actions

This Discussion