cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
847
Views
0
Helpful
5
Replies

7921G and Paging Groups

jtucker
Level 1
Level 1

All,

We have a paging group of roughly 40 phones.  2 of the phones included in this group are 7921G wireless hadnsets.  Neither of the wireless phones base stations intercom seem to either be configured or working.  Are the 7921's able to give an audible page like the rest of the phones, is this something I need to enable, and if so how?

Thanks in advance.

Jeremy

5 Replies 5

Steven DiStefano
VIP Alumni
VIP Alumni

Did you configure with CCA 2.2.4?

Did you notice if 'paging-dn x unicast' is applied to the ephone used by the 7921?

Steve

Thanks for the response.  The current CCA installed is 2.2(1), but the system has been in place almost a year.  I believe

they were originally configured with 2.1.8.

Here is a copy of the ephone-dn for 1 of the 2 phones.

ephone-dn  56  dual-line
number 152
label 152
description File Room
name File Room
hold-alert 120 originator

Would simply adding "paging-dn x unicast" resolve it?

Thanks,

Jeremy

Yes, I would like for you to try this....

to the EPHONE (not ephone-dn).  I edited my reply (sorry).

Lets say it was page group 103.... and the wifi model phone was ephone 2.   Then CCA 2.2.4 does this.....  Ignore the other ehones

ephone-dn 3
number 103 no-reg primary
name IP-Paging3
paging ip 239.1.1.3 port 2000
exit

ephone 13
paging-dn 3
exit

ephone 4
paging-dn 3
exit

ephone 14
paging-dn 3
exit

ephone 2
paging-dn 3 unicast <----  * * * *   this would be your 7921 ephone
exit

Thank you so much!  Simply adding the 'unicast' to the end of the paging-dn 1 line and restarting them did resolve the issue.

Thanks for all your help!

Jeremy

Most excellent!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: