UC 560 and SIP trunk

Unanswered Question
Jun 16th, 2010
User Badges:

Hello,


we have a customer that wants to terminate a SIP trunk to an Adtran, and then from the Adtran to the uc560, is this going to cause any problems ?



or do we need to have the SIP trunk connected directly to the uc560


thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Alberto Montilla Mon, 06/21/2010 - 02:27
User Badges:
  • Cisco Employee,

Dear Sir;


This should work, provided the IAD can perform the B2B function properly. UC500 SIP trunk has been tested under multiple scenarios/Servers. Having said that, we dont have any documentation about specifics for configuring SIP trunking towards an Adtran device.


Regards
Alberto

Actions

This Discussion