06-16-2010 09:49 PM - edited 07-03-2021 06:53 PM
Hi,
We have a Cisco WLC (version 4.2.61.0) which we use for our corporate and guest wireless.
For guests, after they associate and open a web browser they are directed to a login page asking them for their user credentials. Currently this login page is a customized page on the WLC it self and only uses HTTP.
Is it possible to have the WLC using HTTPS for this page?
Or do i need to redirect the login page to an external server?
thanks,
06-17-2010 06:14 AM
If you have HTTPS enabled on the controller the webauth login page should use SSL. Just go under Management - HTTP and make sure you have HTTPS enabled. If you don't have it enable the webauth page would not be encrypted.
06-17-2010 02:42 PM
Yes that worked! thanks!
Is it possible to install a valid certificate so the certificate error page is not displayed when someone uses the webauth?
How is this done if it is possible?
06-18-2010 12:49 AM
Hi
That no problem. Just follow the guide in one of these documents:
Chained certificate (think you need to upgrade your system to use chained certifcate) :
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080a77592.shtml
Unchained certificate:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml
Hope it helps.
Kind regards
Johan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide