06-17-2010 12:39 AM - edited 07-03-2021 06:53 PM
Hi,
Can someone please confirm which model 1142N APs I need to buy to operate in Australia with 4404 WLCs please? From what I can tell I need model AIR-LAP1142N-N-K9, is this correct? We're still running pre-CAPWAP v4.2.x.x software on the WLCs by the way.
Thank you.
Brodie
Solved! Go to Solution.
06-17-2010 05:58 AM
Hi Brodie,
N - is most correct my friend
Wireless LAN Compliance Status
Cheers!
Rob
Please support CSC Helps Haiti
06-18-2010 04:26 PM
Australia should be using the "N" regulatory domain. And Rob's right, 1140 is supported on the 6.X (and later) firmware.
06-17-2010 05:58 AM
Hi Brodie,
N - is most correct my friend
Wireless LAN Compliance Status
Cheers!
Rob
Please support CSC Helps Haiti
06-17-2010 09:46 PM
Thanks for the good news. When they didn't associate it crossed my mind that I may have bought over a hundred of these with the incorrect reg domain. But now I'm pretty sure I just have to upgrade the WLC software. I'll go to the v6.x assurewave software I guess.
06-18-2010 05:43 AM
Hi Brodie,
Good stuff
Yes, I'm sorry I missed that in your first post, but the 1140 series was not supported
in any 4.x.x.x WLC versions. I like your thinking of upgrading to the Assurewave
6.x. Make sure we check the exact upgrade path to 6.x before moving forward.
Cheers!
Rob
06-20-2010 06:28 PM
Yep, I'm going:
WLCs 4.2.207.0 to 6.0.196.0
WCS 4.2.128.0 to 6.0.181.0
Location App 3.1.43.0 to 6.0.101.0
Cisco Secure ACS 4.1 to 4.2
That should do it.
Cheers
06-20-2010 06:38 PM
Thanks for the ratings.
By the way, firmware 7.X is now available.
06-20-2010 08:54 PM
It'd take some convincing to upgrade to a new version without a ribbon.
06-18-2010 04:26 PM
Australia should be using the "N" regulatory domain. And Rob's right, 1140 is supported on the 6.X (and later) firmware.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide