06-17-2010 01:26 AM - edited 03-15-2019 11:17 PM
I'd like to know if IP Phones SPA942 LinkSys are compatible with Call Manager 7.X, and if yes how I can configure it.
Thanks in advance
Solved! Go to Solution.
06-17-2010 05:30 AM
Hi there,
The SPA900 series are qualified for use with CUCM
They would be added as third party SIP devices;
Third-Party SIP Phone Configuration Checklist
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b09sip3p.html#wp1007779
Cheers!
Rob
Please support CSC Helps Haiti
06-17-2010 05:30 AM
Hi there,
The SPA900 series are qualified for use with CUCM
They would be added as third party SIP devices;
Third-Party SIP Phone Configuration Checklist
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b09sip3p.html#wp1007779
Cheers!
Rob
Please support CSC Helps Haiti
08-15-2010 01:08 AM
Hi there,
Are the supplementary features compatible? (transfer, conference, hold/unhold with MOH)
08-15-2010 06:28 PM
The Linksys IP Phones: SPA962, SPA942 and SPA922 utilize different API not compatible with Call Manager, but can use as a generic SIP device. The SPA900's utilize another API based on the SIP protocol which exposes all phone features. The only application that utilizes this API is Call Ctrl and essentially any function on the phone can be initiated from the Windows desktop. Click to Dial, Transfer, Conference, Hold/Resume (with moh), End Call, etc. Redial, Incoming, Speed Dial and Custom Directories are available. Also supported are AddIn for Outlook and Internet Explorer.
You can download a trial: www.uctrlit.com/CallCtrl
Steve Wofford
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: