4400G OS to support wireless

Answered Question
Jun 20th, 2010
User Badges:

Hi Guys,


Anyone know how to get wireless working on the 4400G? The only OS i can see on CCO is 5.03 which does not seem to have wireless as an option

Correct Answer by Tomas De Leon about 7 years 1 month ago

The DMM is not an issue here...


As I mentioned above, your image file does NOT have the correct

MD5 Hash which signifies the WRONG Image or CORRUPTED image.


What is the File name that you are using?


and where did you get it from?



T.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Tomas De Leon Sun, 06/20/2010 - 23:04
User Badges:
  • Cisco Employee,

Hello,


You need DMP version 5.2 to support the wireless features.


The DMP Data sheet is here:

http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps7220/data_sheet_c78-480272.html


5.2 is a paid upgrade and is not available on CCO (www.cisco.com).

You will need to purchase Software License.  Please contact you Local

Cisco Sales Rep or You Cisco Account Team.


Thanks


T.

sbasuroy Mon, 06/21/2010 - 02:46
User Badges:

Thanks Tomas,


I have the software now. Unfortunately i'm having a few challenges uploading it onto my DMP. I uploaded 5.03 previously and all i needed to do was browse to the upgrade firmware section of the DMP and browse to the filename and then upload it. Now when i do this the response says:


"We recommend that you browse for a local file  instead of entering its path"


Any ideas?


Cheers

sbasuroy Mon, 06/21/2010 - 06:31
User Badges:

Hi Tomas,


I've played around with this a bit more. I have tried to load 5.2 no luck, however reloading 5.03 works fine and downgrading to 5.01 also works fine. I have also reset the unit to its default configuration. I wonder if there is a possible upgrade path to get to 5.2 ?


Cheers

sbasuroy Tue, 06/22/2010 - 05:18
User Badges:

Thanks Paul,


Have upgraded to 5.1 on the DMP with no hiccups. Still can't upgrade to 5.2 though. I'm upgrading the device locally on the DMP 4400 itself (ie not remotely through DMS)

Tomas De Leon Mon, 06/21/2010 - 06:32
User Badges:
  • Cisco Employee,

Please provide the MD5 file check hash on the

image file that you are trying to use.


Thanks


T.

sbasuroy Mon, 06/21/2010 - 17:06
User Badges:

Hi Tomas,


Its F931B7295FD6D8F33C083C079328A09C

Tomas De Leon Tue, 06/22/2010 - 06:34
User Badges:
  • Cisco Employee,

Ok,  what is the filename that you are running the test on and where did you get

the file.


You have "Its F931B7295FD6D8F33C083C079328A09C"


The MD5 Hash should be "5eb16472cc10746933ac89d87c4ca24c"


This is most likely the issue that you are seeing.  The image is corrupted or the

wrong image.


Cheers!



T.

sbasuroy Tue, 06/22/2010 - 07:29
User Badges:

Gday Tomas,


It also might be this problem as well (I am running DMS 5.2 at the moment)


Upgrade Guide for Cisco Digital Media Suite 5.2.x /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

Excerpt from the following document…

http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/dms/upgrade/guide/dms52upg.pdf

Upgrade Your DMPs

Caution

Because Cisco DMS 5.2 secures all communication between DMPs and your DMM appliance, you must upgrade your DMPs before you upgrade your DMM appliance. Otherwise, you cannot upgrade your DMPs at all and are prevented from managing them centrally.



Is  there any way around  this?

Paul Woelfel Tue, 06/22/2010 - 07:42
User Badges:

No, but where's the problem? You'll have to upgrade your DMPs before you upgrade your DMM, because otherwise DMM will not be able to communicate with the DMPs. If you do it the correct way, everything works fine.


Since 5.2 the DMM will use https to communicate with the DMPs and 5.1 does only support http, the DMM won't be able to manage players with version 5.1.


As far I understand, you are doing an upgrade direct on the player. If you're using DMM 5.1, the player will be able to upgrade, but DMM won't be able to manage it afterwards.

Correct Answer
Tomas De Leon Tue, 06/22/2010 - 08:31
User Badges:
  • Cisco Employee,

The DMM is not an issue here...


As I mentioned above, your image file does NOT have the correct

MD5 Hash which signifies the WRONG Image or CORRUPTED image.


What is the File name that you are using?


and where did you get it from?



T.

sbasuroy Wed, 06/23/2010 - 02:43
User Badges:

Hi Tomas,


Thank you for pushing the point. I made some enquiries and indeed i received a corrupted image (even though the file size was exactly the same as the working copy). I have a working image now and it looks like it works well.


Appreciate all your help guys!


P.S i dont think you need an upgrade path for DMP 4400 (i could be wrong here)h. You might need one for DMS though.


Cheers all.

Actions

This Discussion

Related Content