HUM Interface utilization report error

Satya Siba Sundar Mishra · ‎06-21-2010

Hi Joe,

I have LMS 3.1 installed at one of our client site.

In HUM they are pulling the interface utilization repor

t for routers. we are observing the utilization valu

es comming in the reports are false. the values are in bytes/sec fomat. lets there is a link of 1 GbPS in one of my device. if i am converting the TX utilization in to Gbps it becames 4.04 Gbps. how it is possible that the tx load will reach to 4 Gbps on a 1 Gb link?

Please help me.

Regards,

Satya

Joe Clarke · ‎06-21-2010

Exactly what version of HUM are you using?

Satya Siba Sundar Mishra · ‎06-22-2010

Hi Joe, It is HUM 1.1

Satya Siba Sundar Mishra · ‎06-22-2010

HI Joe,

It is exactly HUM 1.1.0 . please help me to resolve this problem.

Joe Clarke · ‎06-23-2010

You need to upgrade to 1.1.2 to get 64-bit support which is required for such high-speed interfaces. This can be downloaded at http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-hum .