06-21-2010 10:05 AM - edited 07-03-2021 06:54 PM
Hi,
I am planning to implement LAP in my network, (1250 and 1140 series)
I would like to know what is the minimum and maximum Characters can be assigned to an LAP.
Thanks,
06-21-2010 10:11 AM
Normally names can be upto 63 characters...
06-21-2010 10:30 AM
Thanks for your reply,
is there any supporting document on cisco website or its your practical experience ?
06-21-2010 10:12 AM
minimum is 1 i guess.. not sure, i hv not tried..
06-21-2010 10:34 AM
Practical experience.. and also came to know using the below doc..
https://www.cisco.com/en/US/docs/wireless/bridge/1400/12.3_8_JA/configuration/guide/p38adm.html
the doc is for autonomous.. however, if we have the LAP and if we issue the command "debug lwapp/capwap console cli" , "config t" , hostname
06-21-2010 10:35 AM
Practical experience.. and also came to know using the below doc..
https://www.cisco.com/en/US/docs/wireless/bridge/1400/12.3_8_JA/configuration/guide/p38adm.html
the doc is for autonomous.. however, if we have the LAP and if we issue the command "debug lwapp/capwap console cli" , "config t" , hostname
06-21-2010 01:34 PM
Thanks for your reply,
I have read one more document from cisco site,
http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43frst.html
here for 1200 series AP they have mentioned "You can enter up to 32 characters for the system name."
thats why I wanted to confirm will LAP support more than 32 characters or not.
I am designing a Wireless for Company, these details are required to complete my decision.
Cheers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide