06-22-2010 02:02 AM - last edited on 03-25-2019 10:51 PM by ciscomoderator
Can we run the callconnector client with Windows 7 CallConnector 32bit and 64bit? I tested the latest version with Windows 7 32 bit and it doesn't work. The client installs successfully but some services don't start including service Unified CallController (status: Disconnected). I use the TAPI mode.
thank you for your help.
Solved! Go to Solution.
06-22-2010 07:49 AM
David,
I beleive the forums reported that the Call Connector does not work on Windows 7 64 bit platform. Since your last post I tried to install it on a Win7 64 bit system. I could install it and the call connector downloaded the lines and tested okay however it would not start the call connector popup. I have changed the application to run as administrator even tried Windows XP mode and it would not run. I am attaching screenshots of the error message. Please let me know your suggestions to get this working.
Test:
Connecting to host '192.168.10.1 ' [192.168.10.1]...
Host192.168.10.1 ' [192.168.10.1] is not responding.
32 bytes received in 94 msecs.
IP-Address: 192.168.10.1IP Phone User Name: JibuMathews, Port: 2000
Found Router : 192.168.10.1
Line: 1 DN = 101 DisplayName = Jibu Mathews Channels = 2
Line: 2 DN = 102 DisplayName = Ed Cenkner Channels = 2
Line: 3 DN = 103 DisplayName = TL Reception Channels = 2
Line: 4 DN = 104 DisplayName = Rod Millar Channels = 2
Line: 5 DN = 105 DisplayName = TL Wireless Channels = 2
Click Next to continue.
Regards,
Jibu Mathews
06-22-2010 04:04 AM
Hi There,
Call Connector works quite well with WIN7, that is the predominant platform I install it on right now.
A couple of things you may need to do:
64 bit should work as well with no problems, I have also installed the 32bit version and it ran, albeit with a couple of small issues, but it did run
Hope the above information helps you out.
Cheers,
David.
06-22-2010 07:49 AM
David,
I beleive the forums reported that the Call Connector does not work on Windows 7 64 bit platform. Since your last post I tried to install it on a Win7 64 bit system. I could install it and the call connector downloaded the lines and tested okay however it would not start the call connector popup. I have changed the application to run as administrator even tried Windows XP mode and it would not run. I am attaching screenshots of the error message. Please let me know your suggestions to get this working.
Test:
Connecting to host '192.168.10.1 ' [192.168.10.1]...
Host192.168.10.1 ' [192.168.10.1] is not responding.
32 bytes received in 94 msecs.
IP-Address: 192.168.10.1IP Phone User Name: JibuMathews, Port: 2000
Found Router : 192.168.10.1
Line: 1 DN = 101 DisplayName = Jibu Mathews Channels = 2
Line: 2 DN = 102 DisplayName = Ed Cenkner Channels = 2
Line: 3 DN = 103 DisplayName = TL Reception Channels = 2
Line: 4 DN = 104 DisplayName = Rod Millar Channels = 2
Line: 5 DN = 105 DisplayName = TL Wireless Channels = 2
Click Next to continue.
Regards,
Jibu Mathews
06-22-2010 01:38 PM
Hi Jibu,
The first image is not an issue this can be resolved, and is due to the TAPI not working.
I must apologies i failed to read in your post that you are using it in personal mode, and there in lies the problem, there is no Cisco 64Bit TAPI driver so the 32Bit will not install no matter what.
On the side i have a friend working on a 64Bit version, however though i do not know how long he will take, then the problem is how to get UCCPU to work with it.
If you want to use in in a 64Bit environment you will need server version
Again sorry for missing the information in the first post.
Cheers,
David.
06-22-2010 07:23 PM
Hi Jibu/David:
The x64-bit versions of the CME TSP and the UCC Clients are in dev-test. We expect them to be available in August, with earlier availability of beta versions. For now, as David mentioned, the UCC client can run in the server mode on x64-bit Windows.
Thanks
CallConnector Team
06-23-2010 03:02 AM
hi every body,
First of all, thank you for your answers, I tested the CallConnector client on a windows 7 32 bit and it runs. Indeed it doesn't run on a 64 bit Windows 7 platform. I got the same error messages similar to those of jmathews63002.
David trad, there is no problem for your first post. Now I understand how works CallConnector.
shtalukd, you said in your post that there is a beta version available for 64 bit platform. Where do I download this beta version?
06-23-2010 04:25 AM
Thanks for your clarification. I have a scenario and maybe you could give some insight if the UCC Server could be a solution for a Win7 64 bit client. I have deployed a UC540 along with the SCC Operator console (server & Client). The SCC opertaor works on a Windows 7 32 bit PC. There is a Windows 7 64 bit Client that needs the SCC client. Could the Win7 64 bit PC use the server version to get the SCC working?
Jibu Mathews
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide