Jason Burns Wed, 06/23/2010 - 20:01

Peter,


The instructions are different for CUCM 7.X than previous versions as the function to add files to the TFTP directory has radically changed, but the process is essentially the same.


http://cisco.biz/en/US/docs/voice_ip_comm/cuipph/7920/4_0/english/administration/guide/7920usr.html#wpxref92362


That doc is a great guide to downloading the loud ring tone and the ringlist.xml file.


Wherever it says "Upload to the CUCM TFTP C:\Program Files\....." you will now need to go to


CCM OS Administration Web Page > Install / Upgrade > TFTP File Management and upload the files there. Then go into CCMServiceability and restart the TFTP Service under Control Center > Feature Services.


Once that's completed your new ringtones should show up on the phone interface.


Let me know if this works out, or if you have any more questions.

pwenger Wed, 06/23/2010 - 23:05

Hi Jason


thanks for your reply.

The link to download the ringtone within the document is not this good, as you will be redirected to the voice download page and then you have to search.

Maby you have a link more specific or you know exactly where to find the ringtone or maby you can send it to me?


Regards

Peter

Actions

This Discussion