06-23-2010 01:47 PM
I have a 831 router with the c831-k9o3y6-mz.123-2.XC2.bin software image. I have set the router to accept incoming PPTP tunnels which works fine with Windows XP workstations. When I try to connect via a Vista or Windows 7 machine I get to "Registering your computer on the network..." and it fails with "Error 742: The remote computer does not support the required data encryption type."
I have the following commands...
vpdn-group 1
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 1
interface Virtual-Template1
ip unnumbered Ethernet1
peer default ip address pool VPNUSERS
no keepalive
ppp encrypt mppe auto required
ppp authentication ms-chap ms-chap-v2
Any help would be greatly appreciated.
06-24-2010 07:12 AM
Hi,
The router is requiring MPPE encryption from the PPTP client.
Is MPPE encryption enabled on the vista/7 machines?
Could you try setting the encryption to optional instead than required and see if those machines connect fine?
Federico.
06-28-2010 07:04 AM
I will try your suggestion. I'm not sure how to check to see if MPPE is enabled on a Vista / Win 7 machine. Do you?
Thanks again for your help.
Todd
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide