I am using CUCM 7.1. In order to add VG224 MGCP by BAT, it says enter the first 10 digits from MAC address. what mac address is it referring to?
Put the name that you will configure the VG224 with, e.g. when you configure it (yep, you do need to put basic config on their - IP, mgcp commands, config download etc) you will set the hostname and optionally ip domain name:
ip domain-name mycompany.com
In that example your device name would be:
You may not set a DNS domain name, in which case the device name would be
It is important that it matches exactly, if it's not right it won't register.
Finally, if you use DHCP it might pick up a domain name from DHCP even if you don't expect it - generally you'd use static addressing for this sort of thing though.
Please rate helpful posts and mark answered questions that you've got a satisfactory response from to help identify useful content in the forums...