I finally got my SIP trunk provider. They have their side configured but I can't place or recieve any calls. I keep getting a busy signal both ways. I tried dialing 9 then a local number and I keep getting a busy signal.
I have a cisco 2801 Voice Bundle,PVDM2-8,SP Serv,64F/256D
flash:c2801-spservicesk9-mz.124-24.T2.bin with IP phones on inside
Waiting on SCUE-AIM card for Unity and AA (should get it soon I hope)
This is the information I got from my service provider to configure my side of the SIP trunk:
DID: 1-705-269-6665 ***This is the phone number they gave me
and IP address of the SIP server: 188.8.131.52 and username and password to go with this.
I have attached 3 files. The first one is a photo of my set, one showing my configurations with show run command and the other showing the log for debug ccsip messages. My phones are all able to place calls over PSTN but now my problem is trying to configure the phones to place and receive calls over my cable modem internet to SIP Trunk provider. I am in training and trying to learn as I go and am pretty sure that the problem is with my configurations just not sure what my problem is and how to correct it.
Thanks very much for any help