clear config - interface

Answered Question

hi! what's the command to clear an gigaethernet internface config on a 4506e sw? currently there are lots of qos and security stuffs on some of the gigaethernet port. instead of using the no command for each of the line, is there a command to clear all these config? i just want to configure access vlan on the port.


thx.

Correct Answer by Lim Seow Hua about 6 years 10 months ago

You can try to use below command on the configuration mode....


xxx-xxx(config)#default interface gigabitEthernetx/x - specify the port that you would like to clear the configuration...see whether it works or not.

And let me know later

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (3 ratings)
Loading.
Correct Answer
Lim Seow Hua Wed, 06/23/2010 - 20:52
User Badges:

You can try to use below command on the configuration mode....


xxx-xxx(config)#default interface gigabitEthernetx/x - specify the port that you would like to clear the configuration...see whether it works or not.

And let me know later

Asbathc786 Tue, 01/05/2016 - 03:27
User Badges:

Hi there,


I tried the above command and it works.


Thanks,

Actions

This Discussion