We are configuring the below event manager config on the cisco router
event manager session cli username "<name>"
event manager applet XYZ
event track 1 state down
action 1.1 cli command "enable"
action 1.2 cli command "config t"
action 1.3 cli command "interface <>"
action 1.4 cli command "no ip access list"
where in we are tracking the peering serial IP and if the peering goes down the below set of comands configured in EEM must be run.
The configured applet is running but its giving the below error messges when we do debug
Jun 24 11:10:28.217: fh_server: fh_io_msg: received msg FH_MSG_CALLBACK_DONE from client 2 pclient 1
Jun 24 11:10:28.217: fh_io_msg: EEM callback policy XYZ has ended with abnormal exit status of 0xFFFFFFFF
Jun 24 11:10:28.217: EEM policy XYZ has exceeded it's elapsed time limit of 20.0 seconds
Jun 24 11:10:28.217: fh_schedule_callback: fh_schedule_callback: cc=64ADA6E8 prev_epc=643C2FE4; epc=0
Jun 24 11:10:28.217: fh_schedule_policy: prev_epc=0x00000000; epc=0x00000000
Jun 24 11:10:28.217: fh_server: fh_io_msg: received msg FH_MSG_API_CLOSE from client 2 pclient 1
Jun 24 11:10:28.217: fh_io_msg: received FH_MSG_API_CLOSE client=2
Actually the EEM policy is entering in config mode after that we have the below error
EEM policy XYZ has exceeded it's elapsed time limit of 20.0 seconds :-----------------> ******