Login problem in that the radius server is not configured. And the local user does not authenticate

Unanswered Question
Jun 24th, 2010
User Badges:

When trying to login, the message appears "No radius server configured" and the local user does not authenticate. How do I access without rebooting the Switch 6500 with CatOS.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Panos Kampanakis Thu, 06/24/2010 - 09:15
User Badges:
  • Cisco Employee,

Unfortunately if you are locked out you need to do password recovery and you will need a reboot for that.

I hope it helps.


PK

maccacio Thu, 06/24/2010 - 09:48
User Badges:

Hi PK.

Thanks for your Attention. You know how to insert a line configuration via SNMP RW  "set radius server 10.112.15.21 auth-port 1645 primary"?

I believe this way or can I work around the problem.

Actions

This Discussion