QoS IP Precedence command

Unanswered Question
Jun 24th, 2010

Does anyone know if the ip precendence command is available in Cisco IOS Software, C2600 Software (C2600-TELCO-M), Version 12.4(19b), RELEASE SOFTWARE (fc1).  c2600-telco-mz.124-19b.bin"


Thank you

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Thu, 06/24/2010 - 12:47

Hello Ikadlik,

you should be able to use match ip precedence or match precedence or set ip precedence or set precedence inside route-maps or policy-maps

the command without the ip can apply to IPv6 packets also, the command with the ip keyword should apply only to IPv4 packets

see

match ip precedence

The match ip precedence command is replaced  by the match  precedence command. See the match precedence command for more  information.

see

http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_m1.html#wp1034932

http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_m1.html#wp1035353

http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_s1.html#wp1059755

it looks like some modern IOS support  only the version without the ip keyword

Hope to help

Giuseppe

Actions

This Discussion