QIG DECODE COMMEND

Unanswered Question
Jun 25th, 2010
User Badges:
  • Silver, 250 points or more

I`m testing names across a H323 link and have previously configured QSIG DECODE on a IOS 12.4 Router however when I tried to enter on the router below I have no option after enter VOICE SERVICE VOIP




Cisco IOS Software, 3800 Software (C3845-IPVOICEK9-M), Version 12.4(13e), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 13-Dec-07 20:10 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

xxxxx uptime is 20 weeks, 4 days, 20 hours, 32 minutes
System returned to ROM by reload at 12:09:47 UTC Sun Jan 31 2010
System image file is "flash:c3845-ipvoicek9-mz.124-13e.bin"


At a Ciso url http://www.cisco.com/en/US/docs/ios/12_3t/voice/command/reference/vrht_q1.pdf     it shows that it was introduced at

This command was integrated into Cisco IOS Release 12.4(9)T.


Any ideas -thanks



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Fri, 06/25/2010 - 15:22
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

As the document says, update IOS.

iptuser55 Mon, 06/28/2010 - 00:00
User Badges:
  • Silver, 250 points or more

Am I not already above t

he suggested IOS 124-13e.bin?

paolo bevilacqua Mon, 06/28/2010 - 01:20
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

No you are not. Use T not mainline.

Actions

This Discussion