HELP upgrade fwsm procedure

Answered Question
Jun 25th, 2010
User Badges:

Hi,

i need help for upgrade ASDM and Software of a FWSM.

My running software is FWSM Version 3.2(5) and i want to upgrade to last release.

ALso i want to upgrade ASDM to last release ASDM 6.2F.


Can some one explain me the exact procedure to upgrade the FWSM.

thanks a lot. 

Correct Answer by Marcin Latosiewicz about 6 years 10 months ago

Yes, sir. That's correct.


You can store images for both ASDM and FWSM on disk if you want to, but you cannot boot them from disk.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
f.mottini Fri, 06/25/2010 - 02:37
User Badges:

Thanks a lot,

the section that i must read is "Installing Application Software from the FWSM CLI" , correct?

But in ASA you download the image in DISK0:,here in the flashcard?

In ASA you must use command boot to specify witch ASDM or Software you want to load on boot, here i not specify nothing?

thanks a lot best regards.

Marcin Latosiewicz Fri, 06/25/2010 - 03:53
User Badges:
  • Cisco Employee,

FWSM unlike ASA does not have the "boot system ..." CLI.


It can only boot from flash:image


Marcin

f.mottini Fri, 06/25/2010 - 03:54
User Badges:

So i need only to download the asdm and software version to falsh and that it......

correct ?

Thanks a lot.

Correct Answer
Marcin Latosiewicz Fri, 06/25/2010 - 03:57
User Badges:
  • Cisco Employee,

Yes, sir. That's correct.


You can store images for both ASDM and FWSM on disk if you want to, but you cannot boot them from disk.

Actions

This Discussion

Related Content