06-25-2010 01:46 AM - edited 03-11-2019 11:03 AM
Hi,
i need help for upgrade ASDM and Software of a FWSM.
My running software is FWSM Version 3.2(5) and i want to upgrade to last release.
ALso i want to upgrade ASDM to last release ASDM 6.2F.
Can some one explain me the exact procedure to upgrade the FWSM.
thanks a lot.
Solved! Go to Solution.
06-25-2010 03:57 AM
Yes, sir. That's correct.
You can store images for both ASDM and FWSM on disk if you want to, but you cannot boot them from disk.
06-25-2010 02:18 AM
It's all described in configuration guide.
http://www.cisco.com/en/US/docs/security/fwsm/fwsm32/configuration/guide/swcnfg_f.html
06-25-2010 02:37 AM
Thanks a lot,
the section that i must read is "Installing Application Software from the FWSM CLI" , correct?
But in ASA you download the image in DISK0:,here in the flashcard?
In ASA you must use command boot to specify witch ASDM or Software you want to load on boot, here i not specify nothing?
thanks a lot best regards.
06-25-2010 03:53 AM
FWSM unlike ASA does not have the "boot system ..." CLI.
It can only boot from flash:image
Marcin
06-25-2010 03:54 AM
So i need only to download the asdm and software version to falsh and that it......
correct ?
Thanks a lot.
06-25-2010 03:57 AM
Yes, sir. That's correct.
You can store images for both ASDM and FWSM on disk if you want to, but you cannot boot them from disk.
06-25-2010 04:01 AM
Thanks a lot you are perfect.
Best regards.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: