Solved: HELP upgrade fwsm procedure

f.mottini · ‎06-25-2010

Hi,

i need help for upgrade ASDM and Software of a FWSM.

My running software is FWSM Version 3.2(5) and i want to upgrade to last release.

ALso i want to upgrade ASDM to last release ASDM 6.2F.

Can some one explain me the exact procedure to upgrade the FWSM.

thanks a lot.

Marcin Latosiewicz · ‎06-25-2010

Yes, sir. That's correct.

You can store images for both ASDM and FWSM on disk if you want to, but you cannot boot them from disk.

Marcin Latosiewicz · ‎06-25-2010

It's all described in configuration guide.

f.mottini · ‎06-25-2010

Thanks a lot,

the section that i must read is "Installing Application Software from the FWSM CLI" , correct?

But in ASA you download the image in DISK0:,here in the flashcard?

In ASA you must use command boot to specify witch ASDM or Software you want to load on boot, here i not specify nothing?

thanks a lot best regards.

Marcin Latosiewicz · ‎06-25-2010

FWSM unlike ASA does not have the "boot system ..." CLI.

It can only boot from flash:image

Marcin

f.mottini · ‎06-25-2010

So i need only to download the asdm and software version to falsh and that it......

correct ?

Thanks a lot.

Marcin Latosiewicz · ‎06-25-2010

Yes, sir. That's correct.

You can store images for both ASDM and FWSM on disk if you want to, but you cannot boot them from disk.

f.mottini · ‎06-25-2010

Thanks a lot you are perfect.

Best regards.