How to set RAID 1 in C200-M1

Answered Question
Jun 25th, 2010
User Badges:

Hi, does anybody know how to set RAID1 in UCS C200-M1?


Thanks in advance


Lenin

Correct Answer by jdrurycisco about 7 years 1 month ago

Go into the BIOS of the server and disable quiet boot.  Once this is done reboot the server and enter the LSI config during the boot process.  I think it is a ctrl-S to get into the LSI config.  Once you are in the LSI config you can set the RAID level for the drives.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
leninvs2502 Sat, 06/26/2010 - 14:27
User Badges:

Thanks for replying ccietrainee1, I've got a C200-M1 with two local disks, 140GB each one, and I want to set RAID 1 between them, how can I see the type of RAID controller in the server or do I have to install it?

I really appreciate your help

Correct Answer
jdrurycisco Sat, 06/26/2010 - 16:30
User Badges:

Go into the BIOS of the server and disable quiet boot.  Once this is done reboot the server and enter the LSI config during the boot process.  I think it is a ctrl-S to get into the LSI config.  Once you are in the LSI config you can set the RAID level for the drives.

leninvs2502 Sat, 06/26/2010 - 17:23
User Badges:

Thanks a lot jdrurycisco,

I'm using ESX 4.0 Update1, Do I have to reinstall it after change to RAID 1 or it's not necessary?

Very grateful

Lenin

Actions

This Discussion

Related Content