06-26-2010 04:07 AM - edited 03-04-2019 08:53 AM
I want to connect 3 branches with ISDN line . All the branches bandwidth requirement is 256 Kbps . As I have suggested the combining 2 ISDN line in to 1 ISDN line by Multilink Group. I have confussion over the configuration .
interface BRI2/0
encapsulation ppp
dialer rotary-group 1
isdn spid1 0835866201
isdn spid2 0835866401
!
interface BRI2/1
encapsulation ppp
dialer rotary-group 1
isdn spid1 0835867201
isdn spid2 0835967401
!
interface Dialer1
ip unnumbered Ethernet0/0
encapsulation ppp
dialer in-band
dialer map ip 172.20.2.1 name kdt-nas 8358661
dialer load-threshold 100 either
dialer-group 1
ppp authentication chap callin
ppp multilink
// I don't have the SPID no , I have the ISDN No should i add the country code as well before the We DN no or how it will be in case only ISDN no . Our ISDN no is 968-24609638 , 639 . Kindl assist me to configure the ISDN .
Solved! Go to Solution.
06-28-2010 06:59 AM
hi
i guess its a point to point ISDN line between your locations, as far as i know you dont need to have SPID instead you can configure the remote peer isdn no.
below link provides you a simple sample config which you can try out there..
http://www.cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a00800a3b7a.shtml
regds
06-28-2010 06:59 AM
hi
i guess its a point to point ISDN line between your locations, as far as i know you dont need to have SPID instead you can configure the remote peer isdn no.
below link provides you a simple sample config which you can try out there..
http://www.cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a00800a3b7a.shtml
regds
06-29-2010 01:47 AM
Thanks Prem this is the exact scenario
Rgd's
Sayed Ashraf
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide