CUCM7.1.3 - MC remote destication pickup issue

Unanswered Question
Jun 26th, 2010
User Badges:


CUCM7.1.3 configured mobile connect feature but I have below issue

-pickup by IP Phone and send to remote destinatio phone, and send to IP Phone again, works okay

-pickup by remote destion phone and send to IP Phone successfully, at this time, when I send back to remote destion phone, got error message "mobile phone number error" when I choose the "Send,,,," option from <Mobility> softkey.

the problem is, the first attempt to send to remote destionation phone works okay but problem when I send back to remote destinaiton phone which I got the call from remote destionation phone. problme on the re-sending call.

Looks it allow only one hop and problem with error message "mobile phone number error" in 2nd hop,,,,, I don't think this is configuration issue because works okay for the 1st hop in either direction.

Advice please,

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
dennis.kwok Thu, 08/12/2010 - 00:33
User Badges:

Hi Cjrchoi11,

I have same issue, Do you have the solution ?

It is OK to resend call to remote destination for MGCP link with protocol Q-Siginal, but It is NI2 in HK.



dennis.kwok Thu, 08/26/2010 - 00:39
User Badges:


I opened TAC case,  upgraded to to fix it




This Discussion