FW-----OSPF--->L3switch----redistribute--OSPF into EIGRP ----->WAN router---->dist BGP
The firewall is advertising 10.10.10.1/32 to my l3 switch via ospf, then I want to redistribute that route to my wan router via eigrp 1. WAN router is not seeing the route, if I do a "show ip eigrp top | i 10. in my l3 switch I get the following"
P 10.10.10.2/32, 0 successors, FD is Inaccessible
show ip roure ospf
O E1 10.10.10.2 [110/2] via firewall, 05:32:36, Vlanxx
router eigrp 1
redistribute eigrp 2 metric 128 23000 255 1 1500 route-map WDSin
redistribute ospf 1 metric 100 1 255 1 1500 route-map DMZin
I don't understand why my l3 switch is showing FD inaccessible and not redistributing the route to my wan router.
Thank you very much in advance for any imput.....
It could be that the DMZin route-map is filtering this route. Could you post its configuration and check please?
The 10.10.10.2 is known by OSPF which has an admin of 110 once it is redistributed in to EIGRP it becomes on external EIGRP route which has an admin distance of 170. So the route is still known by OSPF since it has a lower AD. Try manipulating EIGRP external admin distance to some thing lower the 110 and test again.