cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
651
Views
0
Helpful
3
Replies

Onramp Fax-to-mail Sip Trunking

p-vincent
Level 1
Level 1

Hi All,

I'm having the following setup for a customer: PSTN - SIP Provider - Cube - CUCM7.1.3

My customer wants to have incoming faxes converted to an e-mail message. I've done this several times before with the onramp TCL script without any problem but never with a SIP trunk (allways with PRI or BRI). With my sip trunking i cannot get it to work.

Anyone any ideas?

Thx in advance.

P-vincent

3 Replies 3

Abu Hadee
Level 3
Level 3

Hi

You wont be able to do this with SIP. To convert the fax to TIFF images, you need to have DSP. If you really need to do it, you can have back to back E1/T1 card on the CUBE and let the fax call pass through sip to PRI to PRI and onramp fax.

Thanks

- abu

Hi,

Thanks for your quick reply, I only have BRI cards in stock that i can use for this. Can I allso make this work with Sip -> BRI -> BRI -> onramp?

Peter

Hi

BRI back to back is not possible unless you have external simulator.

Either PRI-PRI or FXO-FXS can be used.

Thank you

- Abu

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: