MPLS TE Tunnels not coming up

Unanswered Question
Jun 28th, 2010

Hi All


My mpls TE tunnels don't appear to be coming up for some reason. need assistance.


PE-1#show mpls traffic-eng tunnels summary
Signalling Summary:
    LSP Tunnels Process:            running
    RSVP Process:                   running
    Forwarding:                     enabled
    Head: 4 interfaces, 0 active signalling attempts, 0 established
          0 activations, 0 deactivations
    Midpoints: 0, Tails: 0
    Periodic reoptimization:        every 3600 seconds, next in 703 seconds
    Periodic auto-bw collection:    disabled


PE-1#show mpls traffic-eng tunnels brief
Signalling Summary:
    LSP Tunnels Process:            running
    RSVP Process:                   running
    Forwarding:                     enabled
    Periodic reoptimization:        every 3600 seconds, next in 747 seconds
    Periodic auto-bw collection:    disabled
TUNNEL NAME                      DESTINATION      UP IF     DOWN IF   STATE/PROT
PE-1_t0                          204.134.83.1     -         unknown   up/down
PE-1_t1                          204.134.83.1     -         unknown   up/down
PE-1_t2                          204.134.83.8     -         unknown   up/down
PE-1_t3                          204.134.83.8     -         unknown   up/down
Displayed 4 (of 4) heads, 0 (of 0) midpoints, 0 (of 0) tails

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion