Years
ago I used SDM to run a “wizard” that would perform a security audit on
routers and switches and give you the steps to remediate them. I am
looking for something similar now. I see I can use Cisco Configuration
Professional for the routers but I can’t find a tool for a switch
security audit. Any recommendations? Thanks. 

If you want to know the vulnerbilty and holes in network devices use one of the open standard tools like Nipper is a much better tool.It Supports multiple

vendors such as Juniper and Checkpoint.

Use these two links as references for hardening and secure ios features

Secure IOS template
http://www.cymru.com/Documents/secure-ios-template.html

Cisco Guide to Harden Cisco IOS Devices
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080120f48.shtml

Hope to Help !!

Ganesh.H

Remember to rate the helpful post