I have set up a wireless network with 3 aironet 1140 and 1 controller 2100. I tested everything in the office with our server acting as the DHCP server and everything was working fine.
I then installed the system at the a client today with a ASA5505 acting as the DHCP server and the APs are not getting an IP if they are connected to the controller. they do get an IP if connected to the ASA though. so this is clearly an using with DHCP but I assigned them with static IP so this is not such a big deal. My real issue is that clients connected to the AP are not getting an IP either :-/
Do I have to configure code 43 on the ASA?
DHCP is not enabled on the controller. I tried doing that but that didn't change anything
any help will be really appreciated