Solved: Can I execute DMA when i have a problem with Subscriber

mohamedessoufy · ‎06-29-2010

Hello,

I'm plagning to migrate a Callmanager Cluster from 4.2 version to 7.1next week, but my customer tried to patch the 4.2 version and the patch failed in the subscriber (Now the servers system version in the Publisher is 4.2(3)SR2 and in the subscriber is 4.2(3)SR1/ the Installation ID in the Publisher is CCM4.2(3)SR2 and in the subscriber is 4.2(3)).

Can I execute the DMA in Publisher in this state or i must synchronize the both servers before ?

Regards,

Mohamed

Rob Huffman · ‎06-29-2010

Hi Mohamed,

If it were me I would want everything working properly on the Cluster before

running the DMA The upgrade of the current Sub to 4.2(3)SR2 wouldn't

take too long and would buy you some peace of mind. I'm guessing that

for TAC support this would be a requirement as well.

Just my thoughts my friend,

Cheers!

Rob

View solution in original post

Rob Huffman · ‎06-29-2010

Hi Mohamed,

Good stuff

Again...this is just my opinion, but I would stick with 7.1(3b)SU2. The latest

Patch for 7.1(5) has only been out 12 days and it's predecessor only lasted

3 days before being replaced. I'm sure the VG248 will be fine with 7.1(5) if you

chose to go that route.

Cheers!

Rob

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp43011

View solution in original post

Rob Huffman · ‎06-29-2010

Hi Mohamed,

If it were me I would want everything working properly on the Cluster before

running the DMA The upgrade of the current Sub to 4.2(3)SR2 wouldn't

take too long and would buy you some peace of mind. I'm guessing that

for TAC support this would be a requirement as well.

Just my thoughts my friend,

Cheers!

Rob

mohamedessoufy · ‎06-29-2010

Hi Rob,

Thank you very much for your advise. I agree totaly.

Do you advise me please to upgrade to 7.1(5)SU1a or 7.1(3b)SU2 ?

I find that the VG248 version 1.3(2) is compatible with 7.1(3) but i don't find if it's compatible with 7.1(5) ?

Regards,

Mohamed

Rob Huffman · ‎06-29-2010

Hi Mohamed,

Good stuff

Again...this is just my opinion, but I would stick with 7.1(3b)SU2. The latest

Patch for 7.1(5) has only been out 12 days and it's predecessor only lasted

3 days before being replaced. I'm sure the VG248 will be fine with 7.1(5) if you

chose to go that route.

Cheers!

Rob

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp43011

mohamedessoufy · ‎06-30-2010

Ok thank you very much again Rob

Regrards,

Mohamed