I'm not sure I understand your question about vlan 42, but the static  routes are another story.

Anothe question on static route below

ip route 0.0.0.0 0.0.0.0 10.1.1.1

ip  route 10.0.0.0 255.0.0.0 10.1.1.2 251

which one will be the prefered route  out?

Unless you're learning your 10.0.0.0 subnet from a routing protocol (eigrp/ospf/bgp/etc.), the more specific route will be chosen. Say you don't have a routing protocol and you only rely on static routes. In the example above, if anyone goes to 10.1.1.5 (in the range of 10.0.0.0/8), then it's going to choose the second route and go out 10.1.1.2. If anyone tries to go anywhere else not in the 10.0.0.0/8 subnet, then it'll go out the 10.1.1.1 (first route) gateway.

If you DO have a routing protocol, then the second route will NOT be used unless the route learned from the routing protocol drops out of the table due to loss of connection etc.

Example:

If you have a bgp learned route for 10.0.0.0/8, it would look something like:

B 10.0.0.0 255.255.255.0 [20/0] via 10.1.1.1

If you lose your connection to 10.1.1.1, then the routing table will be updated like:

S 10.0.0.0 255.0.0.0 [251/0] via 10.1.1.2

HTH,

John

** Please rate helpful posts **