sup engine compatibility

Answered Question
Jun 30th, 2010
User Badges:

Hi,


I have a 6506-E switch and trying to insert ws-x6k-sup2-2ge in slot. Tried in first slot and 5th and 6th slot. In all the slots the sup engine comes up. Need to know which is the recommented slot in 6506-E switch to insert the above sup engine.


Also if i am inserting sup 32 in the same switch, which is the recommented slot...



Thanks

Correct Answer by Jon Marshall about 6 years 9 months ago

Richard.Jeff wrote:


Hi,


I have a 6506-E switch and trying to insert ws-x6k-sup2-2ge in slot. Tried in first slot and 5th and 6th slot. In all the slots the sup engine comes up. Need to know which is the recommented slot in 6506-E switch to insert the above sup engine.


Also if i am inserting sup 32 in the same switch, which is the recommented slot...



Thanks


Richard


sup2 goes into slots 1 & 2 (2 is used for standby sup)

sup32 goes into slots 5 & 6 (6 is used for standby)


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Ganesh Hariharan Wed, 06/30/2010 - 23:56
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

Hi,


I have a 6506-E switch and trying to insert ws-x6k-sup2-2ge in slot. Tried in first slot and 5th and 6th slot. In all the slots the sup engine comes up. Need to know which is the recommented slot in 6506-E switch to insert the above sup engine.


Also if i am inserting sup 32 in the same switch, which is the recommented slot...



Thanks


As per the link Sup engine slot for 6506E switches is slot number 1,just check out the below link for more information


http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140sp/140sp1155.pdf


Hope to Help !!


Ganesh.H


Remember to rate the helpful post

Correct Answer
Jon Marshall Thu, 07/01/2010 - 04:32
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Richard.Jeff wrote:


Hi,


I have a 6506-E switch and trying to insert ws-x6k-sup2-2ge in slot. Tried in first slot and 5th and 6th slot. In all the slots the sup engine comes up. Need to know which is the recommented slot in 6506-E switch to insert the above sup engine.


Also if i am inserting sup 32 in the same switch, which is the recommented slot...



Thanks


Richard


sup2 goes into slots 1 & 2 (2 is used for standby sup)

sup32 goes into slots 5 & 6 (6 is used for standby)


Jon

Actions

This Discussion