snmpwalk on FWSM multi-context

Unanswered Question
Jul 1st, 2010
User Badges:

Hi, can somebody drop me the snmpwalk command to get infos from a FWSM context.

My customer tried a lot and does not get info from a context.


to address context admin:

snmpwalk -v2c -c communityi§admin FWSMhostname     
.1.3.6.1.4.1.9.9.109.1.1.1.1.5.1                        
Timeout: No Response from FWSMhostname  


If he addresses the FWSM without context, then it works, so udp161 is open:             
snmpwalk -v2c -c communityi FWSMhostname     
.1.3.6.1.4.1.9.9.109.1.1.1.1.5.1                        
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.5.1 = Gauge32: 0

Regards Guenther
.                                                     

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Farrukh Haroon Wed, 07/14/2010 - 20:06
User Badges:
  • Red, 2250 points or more

Why do you want to put the context name in the snmp-walk command? Each context will have his own IP address space (or at least a unique IP Address), you can just use each context's IP address to run a snmp-walk on it. Please explain your requirement a bit more.


Regards


Farrukh

gseiler Wed, 07/14/2010 - 23:42
User Badges:

Hi, thanks for your response. We already use IP addresses and it works. My customer wanted to use the hostnames but now agreed to use the IP.

Regards Guenther

Farrukh Haroon Thu, 07/15/2010 - 01:57
User Badges:
  • Red, 2250 points or more

Hello


I'm sure you had this in mind already, but you could add all the FWSM Context IPs with different names in DNS (or the hosts file) and use them (if that fulfills the requirement).


Regards


Farrukh

Actions

This Discussion

Related Content