07-01-2010 06:42 AM - edited 03-11-2019 11:06 AM
Hi, can somebody drop me the snmpwalk command to get infos from a FWSM context.
My customer tried a lot and does not get info from a context.
to address context admin:
snmpwalk -v2c -c communityi§admin FWSMhostname
.1.3.6.1.4.1.9.9.109.1.1.1.1.5.1
Timeout: No Response from FWSMhostname
If he addresses the FWSM without context, then it works, so udp161 is open:
snmpwalk -v2c -c communityi FWSMhostname
.1.3.6.1.4.1.9.9.109.1.1.1.1.5.1
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.5.1 = Gauge32: 0
Regards Guenther
.
07-14-2010 08:06 PM
Why do you want to put the context name in the snmp-walk command? Each context will have his own IP address space (or at least a unique IP Address), you can just use each context's IP address to run a snmp-walk on it. Please explain your requirement a bit more.
Regards
Farrukh
07-14-2010 11:42 PM
Hi, thanks for your response. We already use IP addresses and it works. My customer wanted to use the hostnames but now agreed to use the IP.
Regards Guenther
07-15-2010 01:57 AM
Hello
I'm sure you had this in mind already, but you could add all the FWSM Context IPs with different names in DNS (or the hosts file) and use them (if that fulfills the requirement).
Regards
Farrukh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: