configure voice and data vlan on same port cisco unified communication manager 7

Unanswered Question
Jul 1st, 2010
User Badges:

hello,

  I have a switch 4503 , I configure voice and data vlan and assingned to  each  RANGE port fa/0-22 , the problem is when  I plug phone to  the interneface fa 1/0 ------>then pc to phone . pc gets the ip range  of 192.168.5.0 but ip phone doesnt get ip ......


VLAN VOICE 2

VLAN DATA 1 (vlan default)

Thanks for you reply !!!!!!!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ousmane Adama LY Thu, 07/01/2010 - 13:29
User Badges:

sorry i make a mistake the SWITCH IS 2960

VLAN VOICE 2 192.168.1.0/24

VLAN DATA 1 (DEFAULT VLAN 1 ) 192.168.5.0/24

Adrian Saavedra Thu, 07/01/2010 - 15:17
User Badges:
  • Gold, 750 points or more

Hi,


Make sure your config looks like:


interface fastethernet x/y

   switchport access vlan 1

   switchport voice vlan 2


Check cdp is enabled in your switch, and make sure you have a DHCP serving 192.168.1.0/24 in VLAN 2.


Regards,


-- Adrian

shh5455 Thu, 07/01/2010 - 20:50
User Badges:
  • Bronze, 100 points or more

Also check to make sure the IP address assigned to interface Vlan 1 and interface Vlan 2 are what you expect.

This address is how the DHCP server decides what pool to offer an address from.

Actions

This Discussion