Cisco NAC Web Agent error.

Answered Question
Jul 1st, 2010

Anyone encounter this error on the Cisco NAC Web Agent before (see attached)? I am setting up Cisco NAC Aplliance in Out-Of-Band Virtual Gateway mode for Unified Wireless deployment using the WLC. Appreciate if anyone can help to advise what could be the cause of the error. Thanks in advance.

Correct Answer by Lauren Sullivan about 6 years 7 months ago

That means the CAM hasn't received an SNMP trap for that MAC address.  Double-check that the WLC is set up to send traps to the CAM: http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/47/cam/m_woob.html#wp1290626


You can see if the CAM's received a trap for a specific MAC by looking under OOB Management > Devices > Discovered Clients.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Lauren Sullivan Fri, 07/02/2010 - 13:32

That means the CAM hasn't received an SNMP trap for that MAC address.  Double-check that the WLC is set up to send traps to the CAM: http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/47/cam/m_woob.html#wp1290626


You can see if the CAM's received a trap for a specific MAC by looking under OOB Management > Devices > Discovered Clients.

Actions

This Discussion