cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
436
Views
0
Helpful
1
Replies

Internet failver to mpls

sjctdang14
Level 1
Level 1

Hello,

We have three offices and last week our internet at site 1 went down and I have no way to direct traffic to CORP over mpls. The trace route did got to CORP MPLS router but die there and never hit the firewall to go out. Below is our setup

Site1


Core Swith

ip route 0.0.0.0 0.0.0.0 192.169.100.10 ( 192.168.100.10 is WAN LAN router of site 1)

RouterA

Ip route 0.0.0.0 0.0.0.0 192.168.10.10 ( 192.168.100.10 is CORP MPLS IP) ( 192.168.100.9 is CORP Peer)

Firewall to internet allow any IP to NAT overload. Not sure what I am missing here. Thanks

1 Reply 1

John Blakley
VIP Alumni
VIP Alumni

It's really hard to say without a diagram of some sort. Can you post  your topology with addressing (not public addressing).

HTH,
John

HTH, John *** Please rate all useful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco